Advisory CircularsAC 43-11
Reciprocating Engine Overhaul Terminology and Standards
6 PagesDated 3/29/07Change 1Initiated by AFS-300
Summary
What It Is
AC 43-11 explains reciprocating engine overhaul terminology and standards, including fits and limits, major and top overhaul, and what "remanufactured" and zero-time mean.
Why It Matters
Owners buying an overhauled engine need to know which tolerances the facility used and whether the engine records may be zero-timed under 14 CFR 91.421.
1. PURPOSE. This advisory circular (AC) has been revised to update references to Title 14 of the Code of Federal Regulations (14 CFR) part 91. The contents of this document do not have the force and effect of law and are not meant to bind the public in any way, and the document is intended only to provide information to the public regarding existing requirements under the law or agency policies.
2. PRINCIPAL CHANGES. This change updates all references to 14 CFR part 91 in AC 43-11. Information on whom you may contact with questions regarding the information in this AC and where you may obtain a copy are also included.
PAGE CONTROL CHART
| Remove Pages | Dated | Insert Pages | Dated |
|---|---|---|---|
| Pages 1 thru 4 | 4/7/76 | Pages 1 thru 4 | 3/29/07 |
ORIGINAL SIGNED by Roger C. Forshee Jr. for
James J. Ballough Director, Flight Standards Service
Subject: Reciprocating Engine Overhaul Terminology and Standards Date: 4/7/76 AC No: 43-11 Initiated by: AFS-300
1. PURPOSE
This advisory circular (AC) discusses engine overhaul terminology and standards used in the aviation industry. The contents of this document do not have the force and effect of law and are not meant to bind the public in any way, and the document is intended only to provide information to the public regarding existing requirements under the law or agency policies. This AC will:
Inform owners or operators of the variety of terms used to describe types of reciprocating engine overhaul;
Clarify the standards used by the industry during reciprocating engine overhaul; and
Review Title 14 of the Code of Federal Regulations (14 CFR) regarding engine records and standards.
2. WHERE YOU CAN FIND THIS AC
You can find this AC on the Federal Aviation Administration’s (FAA) website at https://www.faa.gov/regulations_policies/advisory_circulars and the Dynamic Regulatory System (DRS) at https://drs.faa.gov.
3. RELATED REGULATORY GUIDANCE
Title 14 CFR part 43, §§ 43.9 and 43.13(a) and (b).
Title 14 CFR part 91, §§ 91.405, 91.417, and 91.421.
4. BACKGROUND
For the maintenance of aircraft engines, the aviation industry uses terms such as top overhaul, major overhaul, etc. The standards to which an engine is overhauled usually depends on the terms used by the person who is performing the engine overhaul. These terms are familiar to the aviation community, but their specific meanings are not fully understood. This lack of understanding may result in similar engines overhauled to different tolerances. The following discussion should give owners or operators, and engine overhaul facilities a better understanding of the terms and standards relating to engine overhaul.
The average aircraft owner usually selects an overhaul facility based on the cost quoted by the engine overhauler. Engine overhauls are accomplished to a variety of standards. Many different facilities perform engine overhauls, ranging from engine manufacturers, large repair stations, or individual powerplant mechanics. The selection of an overhaul facility can and does, in most cases, determine the standards used during overhaul. Section 43.13(a) requires the person performing the overhaul to use methods, techniques, and practices that are acceptable to the Administrator. In most cases, the standards outlined in the engine manufacturer’s overhaul manual are standards acceptable to the Administrator.
Overhaul manuals clearly stipulate the work that must be accomplished during the engine overhaul and outline limits and tolerances used during the inspections. There is no dictionary that provides a commonly accepted standard definition of all the terms used in the aviation industry. The terms discussed in this AC are offered for information purposes only and are not to be considered as definitions set forth in 14 CFR. The only definition in 14 CFR regarding engine overhaul is the word “rebuilt.” This is defined in § 91.421, Rebuilt Engine Maintenance Records.
5. ENGINE OVERHAUL TERMINOLOGY
a. Engine Overhaul Facilities.
(1) Engine overhaul facilities include the following:
The manufacturer, or a manufacturer’s approved agency.
Large and small FAA-certificated repair stations.
Engine shops that perform custom overhauls.
Individual certificated powerplant mechanics.
These facilities offer various services. Regardless of the type or size of the facility, all are required to comply with § 43.13(a) and (b). In this regard, it is the responsibility of the owner to assure that proper entries are made in the engine records in accordance with §§ 91.405 and 91.417. Engine overhaul facilities are required by § 43.9 to make appropriate entries in the engine records of maintenance that was performed on the engine. The owner should ensure that the engine overhaul facility references the tolerances used (new or serviceable) to accomplish the engine overhaul.
b. Fits and Limits. Engine overhaul manuals outline the two kinds of dimensional limits observed during engine overhaul as a “Table of Limits” or a “Table of Dimensional Limits.” These tables list the parts of the engine that are subject to wear and contain minimum and maximum figures for the dimensions of those parts and the clearances between mating surfaces. The lists specify two limits as follows:
(1) Manufacturer’s Minimum and Maximum. Some manufacturers use the terms “new parts” or “new limits” when referring to these dimensional limits. These are the dimensions and standards that all new parts meet as required by 14 CFR for the issuance of a type certificate (TC). It is important to note that new dimensions do not mean new parts are installed in an engine when a manufacturer, or the manufacturer’s authorized representative, presents zero time records in accordance with § 91.421. It does mean that used parts in the engine were inspected and met the manufacturer’s new specifications.
(2) Service Limits. Service limits are dimensions representing limits that must not be exceeded and are dimension limits for permissible wear.
The comparative measurement of parts will determine their serviceability; however, it is not always easy to determine which part has the most wear. The manufacturer’s new dimensions or limits are a guide for determining the amount of wear that has occurred during service. In an engine overhaul, certain parts are replaced regardless of condition. If an engine is overhauled to “serviceable” limits, the parts must conform to the fits and limits specifications as listed in the manufacturer’s overhaul manuals and Service Bulletins (SB).
If a major overhaul is performed to serviceable limits or an engine is top overhauled, the total time on the engine continues in the engine records.
c. Overhaul. In the general aviation industry, the term engine overhaul has two identifications that make a distinction between the degrees of work on an engine:
(1) Major Overhaul. A major overhaul consists of the complete disassembly of an engine. The overhaul facility inspects the engine, repairs it as necessary, reassembles, tests, and approves it for return to service within the fits and limits specified by the manufacturer’s overhaul data. This could be to new fits and limits or serviceable limits. The engine owner should clearly understand what fits and limits should be used when the engine is presented for overhaul. The owner should also be aware of any replaced parts, regardless of condition, as a result of a manufacturer’s overhaul data, SB, or an Airworthiness Directive (AD).
(2) Top Overhaul. Top overhaul consists of repair to parts outside of the crankcase and can be accomplished without completely disassembling the entire engine. It can include the removal of cylinders, inspection and repair to cylinders, inspection and repair to cylinder walls, pistons, valve-operation mechanisms, valve guides, valve seats, and the replacement of pistons and piston rings. All manufacturers do not recommend a top overhaul. Some manufacturers indicate that a powerplant requiring work to this extent should receive a complete overhaul.
Rebuilt.
A rebuilt engine as defined in § 91.421, “is a used engine that has been completely disassembled, inspected, repaired as necessary, reassembled, tested, and approved in the same manner and to the same tolerances and limits as a new engine with either new or used parts. However, all parts used in it must conform to the production drawing tolerances and limits for new parts or be of approved oversized or undersized dimensions for a new engine.”
The definition of the term “rebuilt” in § 91.421 allows the owner or operator to use a new maintenance record without previous operating history for an aircraft engine rebuilt by the manufacturer or an agency approved by the manufacturer.
Remanufacture.
The general term “remanufacture” has no specific meaning in the regulations. A new engine is a product that is manufactured from raw materials. These raw materials are made into parts and accessories that conform to specifications for issuance of an engine’s TC. The term “remanufactured” infers that it would be necessary to return the part to its basic raw material and manufacture it again. “Remanufactured,” as used by most engine manufacturers and overhaul facilities, means that an engine has been overhauled to meet the standards required to grant the engine zero time in accordance with § 91.421.
Not all engine overhaul facilities which advertise “Remanufactured Engines” overhaul engines to new dimensions. Some of these facilities do overhaul to new dimensions but may not be authorized to zero time the engine records. As outlined in § 91.421, only the manufacturer or an agency approved by the manufacturer can grant zero time to an engine.
6. CONTACT
For additional information, please contact the Aircraft Maintenance Division, General Aviation Group at 9-AWA-AFS-300-Maintenance@faa.gov or 202-267-1675.
Advisory Circular Feedback Form
If you find an error in this AC, have recommendations for improving it, or have suggestions for new items/subjects to be added, you may let us know by contacting the Flight Standards Directives Management Officer at 9-AWA-AFB-120-Directives@faa.gov.
Subject: AC 43-11 CHG 1, Reciprocating Engine Overhaul Terminology and Standards
Date: _____________________
Please check all appropriate line items:
An error (procedural or typographical) has been noted in paragraph ____________ on page _______.
Recommend paragraph _____________ on page __________ be changed as follows:
______________________________________________________________________ ______________________________________________________________________
In a future change to this AC, please cover the following subject:
(Briefly describe what you want added.)
______________________________________________________________________ ______________________________________________________________________
Other comments:
______________________________________________________________________ ______________________________________________________________________
I would like to discuss the above. Please contact me.
Submitted by: Date: ______________________