Skip to Main Content
FlightPushFLIGHTPUSH
Part 21

Learn

Dashboard My Courses Mastery Map Practice Flight Bag

Resources

CFR & AIM FAA Orders Handbooks & Guides Certification Standards Pilot/Controller Glossary Advisory Circulars Legal Interpretations
Safety Center
Articles Trust Center
Help Center FAQ Status
  1. Reference Library
  2. CFR & AIM
  3. CFR
  4. Part 21
  5. § 21.223
Loading
flightpush.co home

14 CFR · Part 21

14 CFR § 21.223

Class II provisional airworthiness certificates.

← Previous SectionNext Section →
Read in Subpart I
Part 21 Contents
  • Special Federal Aviation Regulation No. 88: Fuel Tank System Fault Tolerance Evaluation Requirements
  • Subpart A: General
  • Subpart B: Type Certificates
  • Subpart C: Provisional Type Certificates
  • Subpart D: Changes to Type Certificates
  • Subpart E: Supplemental Type Certificates
  • Subpart F: Production Under Type Certificate
  • Subpart G: Production Certificates
  • Subpart H: Airworthiness Certificates
  • Subpart I: Provisional Airworthiness Certificates
  • Subpart K: Parts Manufacturer Approvals
  • Subpart L: Export Airworthiness Approvals
  • Subpart N: Acceptance of Aircraft Engines, Propellers, and Articles for Import
  • Subpart O: Technical Standard Order Approvals
  • Subpart P: Special Federal Aviation Regulations
(a)

Except as provided in § 21.225, an applicant is entitled to a Class II provisional airworthiness certificate for an aircraft for which a Class II provisional type certificate has been issued if—

(1)

He meets the eligibility requirements of § 21.213 and he complies with this section; and

(2)

The FAA finds that there is no feature, characteristic, or condition of the aircraft that would make the aircraft unsafe when operated in accordance with the limitations established in §§ 21.83(h), 91.317, and 121.207 of this chapter.

(b)

The applicant must show that a Class II provisional type certificate for the aircraft has been issued to the manufacturer.

(c)

The applicant must submit a statement by the manufacturer that the aircraft has been manufactured under a quality system adequate to ensure that the aircraft conforms to the type design corresponding with the provisional type certificate.

(d)

The applicant must submit a statement that the aircraft has been found by him to be in a safe operating condition under the applicable limitations.

(e)

The aircraft must be flown at least five hours by the manufacturer.

(f)

The aircraft must be supplied with a provisional aircraft flight manual containing the limitations established by §§ 21.83(h), 91.317, and 121.207 of this chapter.

Regulations Referenced

14 CFR 21.22514 CFR 21.21314 CFR 21.8314 CFR 91.317

Reflects the eCFR edition current as of September 29, 2026. Retrieved from ecfr.gov on October 16, 2026.

Primary Source

  • Official Source (14 CFR · Part 21)