Skip to Main Content
FlightPushFLIGHTPUSH
Part 21

Learn

Dashboard My Courses Mastery Map Practice Flight Bag

Resources

CFR & AIM FAA Orders Handbooks & Guides Certification Standards Pilot/Controller Glossary Advisory Circulars Legal Interpretations
Safety Center
Articles Trust Center
Help Center FAQ Status
  1. Reference Library
  2. CFR & AIM
  3. CFR
  4. Part 21
  5. Subpart N
Loading
flightpush.co home
14 CFR Part 21
  1. SFARs

    Special Federal Aviation Regulation No. 88: Fuel Tank System Fault Tolerance Evaluation Requirements
  2. Subparts

    Subpart A: General
  3. Subpart B: Type Certificates
  4. Subpart C: Provisional Type Certificates
  5. Subpart D: Changes to Type Certificates
  6. Subpart E: Supplemental Type Certificates
  7. Subpart F: Production Under Type Certificate
  8. Subpart G: Production Certificates
  9. Subpart H: Airworthiness Certificates
  10. Subpart I: Provisional Airworthiness Certificates
  11. Subpart J [Reserved]
  12. Subpart K: Parts Manufacturer Approvals
  13. Subpart L: Export Airworthiness Approvals
  14. Subpart M [Reserved]
  15. Subpart N: Acceptance of Aircraft Engines, Propellers, and Articles for Import
    1. § 21.500 Acceptance of aircraft engines and propellers.
    2. § 21.502 Acceptance of articles.
  16. Subpart O: Technical Standard Order Approvals
  17. Subpart P: Special Federal Aviation Regulations

14 CFR Part 21|eCFR Sep 29, 2026

Subpart N

Acceptance of Aircraft Engines, Propellers, and Articles for Import

2 Sections|§§ 21.500–21.502

Read Citation (on FlightPush)

§ 21.500 Acceptance of aircraft engines and propellers.

An aircraft engine or propeller manufactured in a foreign country or jurisdiction meets the requirements for acceptance under this subchapter if—

(a)

That country or jurisdiction is subject to the provisions of an agreement with the United States for the acceptance of that product;

(b)

That product is marked in accordance with part 45 of this chapter; and

(c)

The holder or licensee of a U.S. type certificate for that product furnishes with each such aircraft engine or propeller imported into the United States, an export airworthiness approval issued in accordance with the provisions of that agreement certifying that the individual aircraft engine or propeller—

(1)

Conforms to its U.S. type certificate and is in condition for safe operation; and

(2)

Has been subjected by the manufacturer to a final operational check.

§ 21.502 Acceptance of articles.

An article (including an article produced under a letter of TSO design approval) manufactured in a foreign country or jurisdiction meets the requirements for acceptance under this subchapter if—

(a)

That country or jurisdiction is subject to the provisions of an agreement with the United States for the acceptance of that article;

(b)

That article is marked in accordance with part 45 of this chapter; and

(c)

An export airworthiness approval has been issued in accordance with the provisions of that agreement for that article for import into the United States.

Regulations Referenced Outside This Subpart

14 CFR Part 45
Previous SubpartSubpart L: Export Airworthiness ApprovalsNext Subpart Subpart O: Technical Standard Order Approvals

You Are Reading

§ 21.500 Acceptance of aircraft engines and propellers.

Read Citation (on FlightPush)