14 CFR § 121.425

Initial and transition flight training for flight engineers must include at least the following:

Training and practice in procedures related to the carrying out of flight engineer duties and functions. This training and practice may be accomplished either inflight or in an FSTD.

A flight check that includes—

Preflight inspection;

Inflight performance of assigned duties accomplished from the flight engineer station during taxi, runup, takeoff, climb, cruise, descent, approach, and landing;

Accomplishment of other functions, such as fuel management and preparation of fuel consumption records, and normal and emergency or alternate operation of all airplane flight systems, performed either inflight or in an FSTD.

Flight engineers possessing a commercial pilot certificate with an instrument, category and class rating, or pilots already qualified as second in command and reverting to flight engineer, may complete the entire flight check, required by paragraph (a)(2) of this section, in an approved FFS.

Except as permitted in paragraph (d) of this section, the initial flight training required by paragraph (a) of this section must include at least the same number of programmed hours of flight training and practice that are specified for a second in command pilot under § 121.424(c) unless reduced under § 121.405.

If the certificate holder's approved training program includes a course of training utilizing an FSTD under § 121.409(c), each flight engineer must successfully complete in the FSTD —

Training and practice in at least all of the assigned duties, procedures, and functions required by paragraph (a) of this section; and

A flight check to a flight engineer level of proficiency in the assigned duties, procedures, and functions.