Skip to Main Content
FlightPushFLIGHTPUSH
Part 89

Learn

Dashboard My Courses Mastery Map Practice Flight Bag

Resources

CFR & AIM FAA Orders Handbooks & Guides Certification Standards Pilot/Controller Glossary Advisory Circulars Legal Interpretations
Safety Center
Articles Trust Center
Help Center FAQ Status
  1. Reference Library
  2. CFR & AIM
  3. CFR
  4. Part 89
  5. § 89.410
Loading
flightpush.co home

14 CFR · Part 89

14 CFR § 89.410

Acceptance of a means of compliance.

← Previous SectionNext Section →
Read in Subpart E
Part 89 Contents
  • Subpart A: General
  • Subpart B: Operating Requirement
  • Subpart C: FAA-Recognized Identification Areas
  • Subpart D: Requirements for Standard Remote Identification Unmanned Aircraft and Remote Identification Broadcast Modules
  • Subpart E: Means of Compliance
  • Subpart F: Remote Identification Design and Production
(a)

A person requesting acceptance of a means of compliance must demonstrate to the Administrator that the means of compliance addresses all of the requirements of subparts D and E of this part, and that any standard remote identification unmanned aircraft or remote identification broadcast module designed and produced in accordance with such means of compliance would meet the performance requirements of subpart D of this part.

(b)

The Administrator will evaluate a means of compliance that is submitted to the FAA and may request additional information or documentation, as needed, to supplement the submission.

(c)

If the Administrator determines the person has demonstrated that the means of compliance meets the requirements of subparts D and E of this part, the FAA will notify the person that the Administrator has accepted the means of compliance.

Reflects the eCFR edition current as of July 6, 2026. Retrieved from ecfr.gov on July 17, 2026.

Primary Source

  • Official Source (14 CFR · Part 89)