Skip to Main Content
FlightPushFLIGHTPUSH
Part 60

Learn

Dashboard My Courses Mastery Map Practice Flight Bag

Resources

CFR & AIM FAA Orders Handbooks & Guides Certification Standards Pilot/Controller Glossary Advisory Circulars Legal Interpretations
Safety Center
Articles Trust Center
Help Center FAQ Status
  1. Reference Library
  2. CFR & AIM
  3. CFR
  4. Part 60
  5. § 60.25
Loading
flightpush.co home

14 CFR · Part 60

14 CFR § 60.25

Operation with missing, malfunctioning, or inoperative components.

← Previous SectionNext Section →
Read in §§ 60.1–60.37
Part 60 Contents
  • §§ 60.1–60.37
  • Appendix A to Part 60: Qualification Performance Standards for Airplane Full Flight Simulators
  • Appendix B to Part 60: Qualification Performance Standards for Airplane Flight Training Devices
  • Appendix C to Part 60: Qualification Performance Standards for Helicopter Full Flight Simulators
  • Appendix D to Part 60: Qualification Performance Standards for Helicopter Flight Training Devices
  • Appendix E to Part 60: Qualification Performance Standards for Quality Management Systems for Flight Simulation Training Devices
  • Appendix F to Part 60: Definitions and Abbreviations for Flight Simulation Training Devices
(a)

No person may knowingly use or allow the use of or misrepresent the capability of an FSTD for any maneuver, procedure, or task that is to be accomplished to meet training, evaluation, or flight experience requirements of this chapter for flight crewmember certification or qualification when there is a missing, malfunctioning, or inoperative (MMI) component that is required to be present and correctly operate for the satisfactory completion of that maneuver, procedure, or task.

(b)

Each MMI component as described in paragraph (a) of this section, or any MMI component installed and required to operate correctly to meet the current Statement of Qualification, must be repaired or replaced within 30 calendar days, unless otherwise required or authorized by the responsible Flight Standards office.

(c)

A list of the current MMI components must be readily available in or adjacent to the FSTD for review by users of the device. Electronic access to this list via an appropriate terminal or display in or adjacent to the FSTD is satisfactory. The discrepancy log may be used to satisfy this requirement provided each currently MMI component is listed in the discrepancy log.

Referenced By

Safety Alerts for Operators (SAFO) (1)

  • SAFO 20014

Documents that cite this section, found in their catalog metadata or text. Listed by date, not by significance.

Reflects the eCFR edition current as of October 15, 2026. Retrieved from ecfr.gov on October 29, 2026.

Primary Source

  • Official Source (14 CFR · Part 60)