Skip to Main Content
FlightPushFLIGHTPUSH
Part 107

Learn

Dashboard My Courses Mastery Map Practice Flight Bag

Resources

CFR & AIM FAA Orders Handbooks & Guides Certification Standards Pilot/Controller Glossary Advisory Circulars Legal Interpretations
Safety Center
Articles Trust Center
Help Center FAQ Status
  1. Reference Library
  2. CFR & AIM
  3. CFR
  4. Part 107
  5. § 107.140
Loading
flightpush.co home
Loading reference

14 CFR · Part 107

14 CFR § 107.140

Category 4 operations.

← Previous SectionNext Section →
Read in Subpart D
Part 107 Contents
  • Subpart A: General
  • Subpart B: Operating Rules
  • Subpart C: Remote Pilot Certification
  • Subpart D: Operations Over Human Beings
  • Subpart E: Waivers
(a)

Remote pilot in command requirements. To conduct Category 4 operations—

(1)

A remote pilot in command—

(i)

Must use a small unmanned aircraft that is eligible for Category 4 operations pursuant to paragraph (b) of this section; and

(ii)

Must operate the small unmanned aircraft in accordance with all operating limitations that apply to the small unmanned aircraft, as specified by the Administrator.

(2)

No remote pilot in command may operate a small unmanned aircraft in sustained flight over open-air assemblies of human beings unless the operation meets the requirements of either § 89.110 or § 89.115(a) of this chapter.

(b)

Small unmanned aircraft requirements for Category 4. To be eligible to operate over human beings under this section, the small unmanned aircraft must—

(1)

Have an airworthiness certificate issued under part 21 of this chapter.

(2)

Be operated in accordance with the operating limitations specified in the approved Flight Manual or as otherwise specified by the Administrator. The operating limitations must not prohibit operations over human beings.

(3)

Have maintenance, preventive maintenance, alterations, or inspections performed in accordance with paragraph (c)(1) of this section.

(c)

Maintenance requirements for Category 4. The owner must (unless the owner enters into an agreement with an operator to meet the requirements of this paragraph (c), then the operator must) meet the requirements of this paragraph (c):

(1)

Ensure the person performing any maintenance, preventive maintenance, alterations, or inspections:

(i)

Uses the methods, techniques, and practices prescribed in the manufacturer's current maintenance manual or Instructions for Continued Airworthiness that are acceptable to the Administrator, or other methods, techniques, and practices acceptable to the Administrator;

(ii)

Has the knowledge, skill, and appropriate equipment to perform the work;

(iii)

Performs the maintenance, preventive maintenance, or alterations on the small unmanned aircraft in a manner using the methods, techniques, and practices prescribed in the manufacturer's current maintenance manual or Instructions for Continued Airworthiness prepared by its manufacturer, or other methods, techniques, and practices acceptable to the Administrator;

(iv)

Inspects the small unmanned aircraft in accordance with the manufacturer's instructions or other instructions acceptable to the Administrator; and

(v)

Performs the maintenance, preventive maintenance, or alterations using parts of such a quality that the condition of the aircraft will be at least equal to its original or properly altered condition.

(2)

Maintain all records of maintenance, preventive maintenance, and alterations performed on the aircraft and ensure the records are documented in a manner acceptable to the Administrator. The records must contain the description of the work performed, the date the work was completed, and the name of the person who performed the work.

(3)

Maintain all records containing—

(i)

The status of life-limited parts that are installed on, or part of, the small unmanned aircraft;

(ii)

The inspection status of the aircraft; and

(iii)

The status of applicable airworthiness directives including the method of compliance, the airworthiness directive number, and revision date. If the airworthiness directive involves recurring action, the record must contain the time and date of the next required action.

(4)

Retain the records required under paragraphs (c)(2) and (3) of this section, as follows:

(i)

The records documenting maintenance, preventive maintenance, or alterations performed must be retained for 1 year from when the work is completed or until the maintenance is repeated or superseded by other work.

(ii)

The records documenting the status of life-limited parts, compliance with airworthiness directives, and inspection status of the small unmanned aircraft must be retained and transferred with the aircraft upon change in ownership.

(5)

Ensure all records under paragraphs (c)(2) and (3) of this section are available for inspection upon request from the Administrator or any authorized representative of the National Transportation Safety Board (NTSB).

(d)

Compliance with parts 43 and 91 of this chapter. Compliance with part 43 and part 91, subpart E, of this chapter fulfills the requirements in paragraphs (b)(3) and (c) of this section.

Referenced By

Interpretations of This Section (1)

  • Fields - Title 14 CFR § 91.409(f)(3) Interpretation, 2024

Advisory Circulars (2)

  • AC 107-2A
  • AC 20-109B

Documents that cite this section, found in their catalog metadata or text. Listed by date, not by significance.

Regulations Referenced

14 CFR 89.11014 CFR 89.11514 CFR Part 2114 CFR Part 4314 CFR Part 91

Reflects the eCFR edition current as of July 6, 2026. Retrieved from ecfr.gov on July 17, 2026.

Primary Source

  • Official Source (14 CFR · Part 107)