AFH 4-19

Energy Height or Total Specific Energy (ES) Measured in units of height (e.g., feet), it represents the airplane’s total energy per unit weight. It is found by dividing the sum of potential energy and kinetic energy by the airplane’s weight. It also represents the maximum height that an airplane would reach from its current altitude, if it were to trade all its speed for altitude. Energy Error An altitude and/or airspeed deviation from an intended target expressed in terms of energy. Depending on the airplane’s total amount of energy and its distribution between altitude and airspeed, energy errors are classified as total energy errors, energy distribution errors, or a combination of both errors. Total Energy Error An energy error where the total amount of mechanical energy is not correct. The airplane has too much or too little total energy relative to the intended altitude-speed profile. When this error occurs, the pilot will observe that altitude and airspeed deviate in the same direction (e.g., higher and faster than desired; or lower and slower than desired). An example would be an airplane on final approach that is above the desired glide slope and at a faster airspeed than desired. Energy Distribution Error An energy error where the total mechanical energy is correct, but the distribution between potential (altitude) and kinetic energy (airspeed) is not correct relative to the intended altitude-speed profile. When this error occurs, the pilot will observe that altitude and airspeed deviate in opposite directions (e.g., higher and slower than desired; or lower and faster than desired). An example would be an airplane on final approach that is above the desired glide slope and at a slower airspeed than desired. Irreversible Deceleration and/or Sink Rate Unrecoverable depletion of mechanical energy as a result of continuous loss of airspeed and/or altitude coupled with insufficient excess power available under a given flight condition. Failure to recover above a certain critical AGL altitude results in the airplane hitting the ground regardless of what the pilot does. Chapter Summary Every pilot is an energy manager—managing energy in the form of altitude and airspeed from takeoff to landing. Proper energy management is essential for performing any maneuver as well as for attaining and maintaining desired vertical flightpath and airspeed profiles in everyday flying. It is also critical to flight safety since mistakes in managing energy state can contribute to loss of control inflight (LOC-I), controlled flight into terrain (CFIT), and approach and landing accidents. The objectives of this chapter are for pilots to: 1) gain an understanding of basic energy management concepts; 2) learn the energy role of the controls for managing the airplane’s energy state; and 3) develop the ability to identify, assess, and mitigate risks associated with failure to manage the airplane’s energy state.